Wuhan Intepower Co., Ltd.
Main products:Solar Controller,Energy Storage Battery,Thermotank
Products
Contact Us
  • Contact Person : Mr. Wan Lirong
  • Company Name : Wuhan Intepower Co., Ltd.
  • Tel : 86-27-84762905
  • Fax : 86-27-84220383
  • Address : Hubei,Wuhan,Special No 2,Zhuankou Xiaoqu Economic Development Zone
  • Country/Region : China
  • Zip : 430056

CE RoHS 20A 12V/24V mppt battery charger

CE RoHS 20A 12V/24V mppt battery charger
Product Detailed
mppt battery charger 1.MPPT function 2. increasing the solar panel efficiency by 10% to 30% 3. LED indicator 4.20A 12V/24V

 CE RoHS 20A 12V/24V mppt battery charger  

Feature:The most important feature of this controller is intelligent tracking input voltage from solar panel, which could 

let solar panel always working at Maximum Power Point of V-A curve. Compared with normal solar charge controller, 

this MPPT controller could increase 10%-30%   electrical power using efficiency from solar panel.

Function:This MPPT controller is not only have above mentioned special function, at the same time including completely

Protecting and Controlling functions:

Overcharge protection

Overdischarge protection

Battery Reverse Current Protection

Overloading Protection

Short Circuit Protection

Reverse Polarity Connection Protection 

Specifications:

Model

YTC-WT-20-12/24

Rated voltage

DC:12V / 24V 

Max current

20A

No load loss

≤8mA/12V / 24V 

Voltage drop

≤300mV

Max voltage of solar panel

23V/12V,×2/24V

Full charge cut

14V/12V,×2/24V

Low voltage cut

10.5V/12V,×2/24V

Reconnected voltage

12.6V/12V,×2/24V

Temperature compensation

-3mV/cell.°C

Efficiency

95%~97%

Wire area

1~2Amm²

Electrical power using efficiency

Can increase 10~30%

Net Weight

0.55Kg

Dimension

188×118×55mm

Attention:

1. Please check the rated voltage of the solar panel, battery, and load are all the same with 12V or 24V.

2. Please pay attention to connection, do not connect the “+” “-” poles of solar panels and loads wrong.( Wrong connection will be burn your MPPT controller)

3. Battery must be connected earlier than solar panels and load. When take off the system, Solar Panels must be take down first, then cut off battery.

4. The rated current of solar panel and load must be less than MPPT controller’s rated current.

CE RoHS 20A 12V/24V mppt battery charger



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.